, let Dremel Zhuomei 4000 becomes a comprehensive machining center

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

I have always wanted to have electric grinding, but I have never been determined to buy, when I do a model, sometimes I have something to work, and I also need it to play a hole. But always forget it. Until the black fifty Dremel 4000 4/34 specials 69 dollars, I can’t help but purchase …

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Without buying a full set, it means that I have to spend money to buy accessories, even if I buy a full set, I have to spend money to buy accessories. Dremel’s feature is particularly fun, a bunch of accessories make you love. I entered the pit as the sea, the money is like a sailor. There is no hand to buy buy buy, so next is the accessory, I have bought the following accessories, my friends don’t learn me, the machine has not actually used it, the accessories bought a lot. …

Among them, there is a work desk class Amazon sales first DREMEL 220 multi-purpose machining center

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Universal invincible small connector DREMEL 4486 million

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

I didn’t get it, continue to buy DREMEL 335 slot cutter …

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Of course, the soft shaft DREMEL 225 is not

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Next, use the toe press the keyboard to purchase the Dremel 575 Transistor.

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

There is also a point of scattered tool set

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Is there any money that the accessories purchased a new machine. But I feel very happy, when I am slowly put the matching box, I feel that I am instantly cute, it is a professional manipulation.

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

In fact, the fact is cruel, with these tools, I don’t have time to use them, but how can I tell when I will tell, I have to think about it. Just recently fascinated your DIY headset, I want to be a headset that can be a wooden earphone shell, so how can I make a perfect processing headphones have become my thinking goal.

The evil Amazon is too bad. When I enthusiastically, I actually sent the DREMEL 220 table with DHL, and I was ordered for a total of 4 days. Since heaven help me, I will build my own work bench.

When reading the information and purchasing materials, I won the legs, and I still saw a small individual CNC multi-axis machining center. Fortunately, I promptly returned back, I finally saved the legs. By the way, Taobao’s cheapest 4-axis machining center 20 30 is only 1000 less than 1000. I really want to play the classmates, I strongly support you to buy and tell me. The final CNC has given me a lot of inspiration in the DREMEL machining center.

Under normal circumstances, the Dremel 4000 is like the original workbench, but I want it to all.

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

I preliminate a functional program:

  1. Can move X-axis Y axis

  2. The x-axis is rotated, which can be combined with DREMEL milling and processing round objects.

  3. You must take your hand to control DREMEL, so the X-axis moved is preferably electric.

  4. The price is not too expensive, so avoid special customization.

This is actually a similarity of a different 4-axis, but it is only two hands, so it is basically impossible to complete the four-axis function, but as a multi-function lathe is a very practical existence. Processing the rules should be no problem. Mainly can be processed is wood and copper aluminum products.

After a few days of research, I purchased the following dissemble for assembly works:

1.X, Y direction movable micro processing table. Because the DREMEL 220 processing table is very low, the limit position can only leave the object a few centimeters for the drill bit. So this mini processing platform is controlled at 8cm. In fact, all Taobao is only such a choice unless it is customized, but the optical workbench may take a few hundred, so the 100 yuan mini’s work is really the same. (The idea is yellow as imitation, and I will ask the seller before buying)

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

2.60W x axis rotation motor mating bracket. Of course, the hole is to be opened according to this workbench, and the hex screw is fixed, because the workbench can be loaded into the hex nut with hexagonal screw fixing objects. This motor is 24V needs to cooperate with 24V 3A power, there are similar power supplies to save money, do not buy 220V is my courage.

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

The 3.10W reduction motor is used to transfer the x-axis, because the price of the workstore is low, and the rotation must not be very slippery, and the motor can better control speed and uniformity. The motor requires a bracket, and the hole is packed on the left side of the mini platform X axis. When this motor is loaded, about 60 turns every minute, the individual feels too fast, regretting no purchase of 3-12V transformer power supply, has re-purchased the power.

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining centerDeceleration motor

4. Two power supplies

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

5. The PWM speed control module is used to adjust the speed of the X-axis rotating motor. Different material cuts require different speeds. It is basically possible to do the 0 speed to full speed, the motor is about 5000-6000 turns at full speed.

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

6. Electric collet, cheap goods, probably not eccentric, can be clamped from 1.5mm-10mm bricks, accessories, etc. Then the corresponding one requires a top needle to match the rotation. Only wood and copper are currently processed, so there is no consideration of the paw disk. The paw dish is not cheap, etc.

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Come to a big collection, of course, Dremel4000 and Dremel 220 I didn’t shoot, wait for the assembly

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Everything is ready, then began to assemble it, first install the mini table to Dremel 220 with screws.

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Install the speed motor to see. First open the two screws on the left side of the platform and a nut, then change two long self-tapping screws, rotate to install the speed reducer, and lock the screws.

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Install the top needle to determine the height. The designer of the top needle can move, and the screw can be slid on the platform when you need to move.

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

According to the height of the top needle block, the center height of the rotary motor is determined, and the rotary electric machine is installed, and the head and lotus needle are installed. It should be noted here that the center of the lotus turns is in the center of the top, and the material will Throw up …

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Continue to be quiet when a beautiful man is electrician, be careful, with the positive and negative poles, and PWM. (Focus mistakes Smecta, but everyone knows)

It’s almost to be completed, too excited.

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Then there was no then, because it was completed, as long as the connection will work. Let’s take a look at the actual work effect.

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Those wires will slowly tide tonight, too mess, but also buy four suction cup screws 220 to fix the glass. More details are as follows, is it very feeling ….

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining centerThree black screws should be adjusted

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining centerTwo gold screws to adjust

嗖, let Dremel Zhuomei 4000 becomes a comprehensive machining center

Finally completed such a multi-function workbench, compared to the original single DREMEL electric grinding and 220 workbench, now joined

  1. X-axis rotation

  2. The x-axis is automatically translated and can be moved before the left and right dimensions.

  3. Install a pliers on the workbench can also drill holes

  4. Can mill

  5. Can be a bead

  6. It can be machined with small objects that can be made, of course, with different machining heads.

It is very accomplished, mainly to study, and the process of measuring materials is very interesting. I can use him to do anything. I haven’t thought about it. I hope everyone will give me suggestions and tutorials. Of course, there is Dremel’s classmates who want to take it. I can consult me, I will share with you how to build how to build how to build. detail.

Finally, there is an important thing to say, whether it is the three small black screws on the front of the mini’s work, or the two golden small screws on the edge of Dremel 220 should be adjusted, and the platform is not shake! It is very important to write in the end! ! !

Thank you for your support, Meng Meng. This expression is used, and finally indulge! !