“Family Decoration Chefling DIY” is full of literary sense, the method of making the chandelier of the chandelier of graphics

(Circle cards have been added here, please check today’s headline client)

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

In the design of home improvement style, wooden chandeliers are an important decoration, not only for lighting, but also a decoration. So how to make design wooden chandeliers, today the carpenters circle will share a creative chandelier made with wooden hanger DIY. For enthusiasts with a certain woodworker foundation, they can be produced according to this tutorial. The following is the production process.

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Main material:

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

The cutting machine (or hand saw), the hand drill, the opening of the hole, the angle device, the corner ruler, the woodworking glue, the pencil, the light head accessories, etc. (if you buy the tool, please enter the wooden craft micro mall).

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Production steps:

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Today, the carpenter circle, the sharing tutorial is the production of the hanger chandelier. This chandelier uses a solid wood hanger commonly used in 15 homes, cut into 30 lampshade blades, and assembles 30 leaves on the lampshade to make a round solid wood hanger chandelier. A total of five steps, interested circle friends can learn.

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

step 1:

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Cut lamp leaf

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Place the hanger for making chandeliers on the woodworking table, and remove the iron nails and hooks on the hanger with a tiger clamp. Cut the middle of the hanger (or the original hook) with the cutting machine (or hand saw), and cut a hanger into two lampshade leaves (that is, the hanger hanging the shoulder plate), with a length of about 24.5cm. After cutting the leaves of 30 lampshades, then make a punch positioning device (pictured), and then drill a round hole on the inside of the lamp cover to connect the tenon holes to the head of the lamp.

Step 2:

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Lamp head

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

First make a wooden board with a thickness of about 2cm, and mark the middle point on it, and then divide the angle of 30 angle lines, that is, each angle is 12 degrees, as the design position of the lampshade blade (as shown in the figure). Then use your hand to cut the head of the round lamp, about 15cm in diameter, then wear the mid -point hole with your hand, and then extend the 30 lampshade leaf lines (equivalent line) to the head of the lamp.

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

First use the iron nails through the middle point of the lamp head, fix it on the wooden plate, and use a table to drill the center position of the equivalent of the equivalent. Then use an open hole to open the hole on the lamp head (for fixing the lamp head). The light lamp head can be stuck on the lampshade lamp head, and the lamp head line plays the role of hanging the entire lampshade. After making, use sandpaper to polish the lampshade and lamp head.

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Step 3:

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Assembly lampshade

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Dip the round wooden stick into the woodwork glue, and then insert the round wooden stick into the round hole around the head of the lampshade. The other end of the round wooden stick is also applied to the glue and inserted the lamp cover. There are also 30 lampshade leaves inserted into the head of the lampshade in turn, and after inserting, use a hammer to tap the blades, so that the leaves can better fix the lampshade head.

Step 4:

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Reinforcement

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Use long rod screws to fix the made chandeliers on the woodworking table, and they are divided into 30 lampshade blades (pictured), and then tightly tightly tightly tied the two leaves with toothpicks. Then apply woodworking glue in the gap of the head of the lamp head, and remove excess glue after applying it. After the glue is dried, remove the made lampshade and paint paint on it, or apply wood wax oil.

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Step 5:

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Completed!

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

Link the head and bulbs on the hanger lampshade. At this point, a very personalized hanger chandelier is made. This wooden hanger chandelier uses rich wooden elements and its round shape. It can be described as a self -created artwork. In your home, such a literary lights and wonderful visual effects on Meimei are worthy of your try.

「家庭装修木工diy」 文艺感十足,图解衣架吊灯的制作方法

(Circle cards have been added here, please check today’s headline client)